insulation · The Build · The Van

Van Build – Interior – Wheel Wells

The Executive Summary I framed out two wooden boxes; one for each wheel well. I insulted the wheel well with some leftover Reflectix and lined my boxes with fiberglass insulation. I attached the insulated boxes to walls and floor. The bed was going to rest on top of them so I needed them to be…… Continue reading Van Build – Interior – Wheel Wells

Purchasing · The Build · The Van

Van Build – The Walls pt. 1

The Executive Summary I went with tongue and groove cedar boards and decided to mount them vertically, rather than horizontally. This was meant to give the interior and taller feel, rather than long and narrow. To accomplish this, we first needed to hang some furring strips that the visible wall boards could be adhered to.…… Continue reading Van Build – The Walls pt. 1

insulation · The Build · The Van · Uncategorized

My Story – Vapor Barriers and bulkheads

The Executive Summary With the insulation of the walls completed, I put up a plastic sheeting to act as a vapor barrier. This would keep the insulation from accumulating moisture which can cause mold. I ordered some 3M weatherstrip adhesive on Amazon to stick the plastic to the metals walls of the vehicle frame. I…… Continue reading My Story – Vapor Barriers and bulkheads